6 Channel LED Work Light Strobe Controller

Key Features:

• Use the same LED lights as both work lights and strobe lights. 4 different modes. 
• Two Independent Output Light Zone
• 6 channel outputs. 20 flash patterns w/ auto recall function.
• Complete mounting accessories include.
• Mounting Instructions: Download PDF

This unique DC 12-24V Compatible LED system is designed for construction and emergency vehicles that need both ultra bright strobe light and work light while performing the task. Instead of the traditional separate warning and work lights systems, XKGLOW control module divides the light outputs into two zones. Each zone can individually function as work lights (solid on) or warning lights (strobe). Please check the table and the video below for detailed mode demonstrations. 

• Press "STROBE": Zone1 & Zone2 = All Strobe Mode
• Press "PATTERN": Select Flash Pattern from 20 Options
• Press "SOLID+STROBE": Zone1 = Work Light Mode; Zone2 = Strobe Mode
• Press "SOLID+STROBE" again: Zone1 = Work Light Mode; Zone2 = OFF
• Press the red button: Zone1 & Zone2 = All Work Light Mode

Tech Specs

• Controller input voltage: DC 12-24V
• Controller output current: 1.5A max for each output wire when using 12V power
• Gauge 20-22 wire is recommended for input wires. Gause 22-24 wire is recommended for output wires

Whats Included

• One (1) Control Box
• One (1) Fuse Holder
• Two (2) Fuse

Resources